8.9 | Instance administration | Delegating authentication

Delegating authentication

Group mapping

When using group mapping, the following caveats apply regardless of which delegated authentication method is used:

Membership in synchronized groups will override any membership locally configured in SonarQube at each login
Membership in a group is synched only if a group with the same name exists in SonarQube
Membership in the default group sonar-users remains (this is a built-in group) even if the group does not exist in the identity provider

When group mapping is configured, the delegated authentication source becomes the only place to manage group membership, and the user's groups are re-fetched with each log-in.

HTTP header authentication

You can delegate user authentication to third-party systems (proxies/servers) using HTTP Header Authentication.

When this feature is activated, SonarQube expects that the authentication is handled prior to any query reaching the server. The tool that handles the authentication should:

Intercept calls to the SonarQube server
Take care of the authentication
Update the HTTP request header with the relevant SonarQube user information
Re-route the request to SonarQube with the appropriate header information

All the parameters required to activate and configure this feature are available in SonarQube server configuration file (in <SONARQUBE_HOME>/conf/sonar.properties).

Using HTTP header authentication is an easy way to integrate your SonarQube deployment with an in-house SSO implementation.

GitHub and GitLab authentication

You can delegate authentication to GitHub or GitLab. See the corresponding DevOps platform integration page for more information:

SAML authentication

You can delegate authentication to a SAML 2.0 Identity Provider using SAML Authentication.

Limitations

SAML requests are not signed. Client signature validation should be disabled in the identity provider.
SAML encrypted responses are not supported. SAML encryption should be disabled in the identity provider.

Example: Using Keycloak as a SAML identity provider

The following example may be useful if you're using Keycloak as a SAML identity provider. If you're not using Keycloak, your settings are likely to be different.

In the Keycloak server, create a new SAML client

Create a new client

Client ID: Something like "sonarqube", it must not contain whitespace.
Client Protocol: saml
Client SAML Endpoint: Can be left empty.

Configure the new client

Under Settings
1. Client Signature Required: OFF.
2. Valid Redirect URIs: <SONARQUBE_URL>/oauth2/callback/saml (for example, https://sonarqube.mycompany.com/oauth2/callback/saml).
In Client Scopes > Default Client Scopes, remove role_list from Assigned Default Client Scopes (to prevent the error com.onelogin.saml2.exception.ValidationError: Found an Attribute element with duplicated Name during authentication).
Under Mappers, create a mapper for each user attribute:
1. Create a mapper for the login:
  1. Name: Login
  2. Mapper Type: User Property
  3. Property: <USER_LOGIN> (Substitute the actual user login. This value should not contain any special characters other than .-_@ to meet SonarQube restrictions)
  4. SAML Attribute Name: login
2. Create a mapper for the name:
  1. Name: Name
  2. Mapper Type: User Property
  3. Property: <USER_NAME> (Substitute the actual user name)
  4. SAML Attribute Name: name
3. (Optional) Create a mapper for the email:
  1. Name: Email
  2. Mapper Type: User Property
  3. Property: <USER_EMAIL> (Substitute the actual user email)
  4. SAML Attribute Name: "email"
4. (Optional) Create a mapper for the groups (if you rely on a list of roles defined in Roles of the realm , not in Roles of the client):
  1. Name: Groups
  2. Mapper Type: Role list
  3. Role Attribute Name: groups
  4. Single Role Attribute: ON
5. If you rely on a list of groups defined in "Groups":
  1. Name: Groups
  2. Mapper Type: Group list
  3. Role Attribute Name: groups
  4. Single Role Attribute: ON
  5. Full Group Path: OFF
In Realm Settings > General > Endpoints, click on SAML 2.0 Identify Provider Metadata to obtain the XML configuration file from Keycloak.

In SonarQube, configure SAML authentication

Go to Administration > Configuration > General Settings > Security > SAML

Enabled: true.
Application ID: The value of the Client ID you set in Keycloak (for example sonarqube).
Provider ID: The value of the EntityDescriptor > entityID attribute in the XML configuration file (e.g., "http://keycloak:8080/auth/realms/sonarqube").
SAML login url: The value of SingleSignOnService > Location attribute in the XML configuration file (e.g., "http://keycloak:8080/auth/realms/sonarqube/protocol/saml").
Identity provider certificate: The value you get from Realm Settings > Keys. Click on the Certificate button.
SAML user login attribute: The value set in the login mapper in SAML Attribute Name (login, in the above example).
SAML user name attribute: The value set in the name mapper in SAML Attribute Name (name, in the above example).
(Optional) SAML user email attribute: The value set in the email mapper in SAML Attribute Name (email, in the above example).
(Optional) SAML group attribute: the value set in the groups mapper in Role/Group Attribute Name (groups, in the above example).

In the login form, the new button Log in with SAML allows users to connect with their SAML account.

SAML and reverse proxy configuration

When using SAML, make sure your reverse proxy is properly configured. See Operating the Server for more information.

You can configure SonarQube authentication and authorization to an LDAP server (including LDAP Service of Active Directory) by configuring the correct values in <SONARQUBE_HOME>/conf/sonar.properties.

The main features are:

Password checking against the external authentication engine.
Automatic synchronization of usernames and emails.
Automatic synchronization of relationships between users and groups (authorization).
Ability to authenticate against both the external and the internal authentication systems. There is an automatic fallback on SonarQube internal system if the LDAP server is down.
During the first authentication trial, if the user's password is correct, the SonarQube database is automatically populated with the new user. Each time a user logs into SonarQube, the username, the email and the groups this user belongs to that are refreshed in the SonarQube database. You can choose to have group membership synchronized as well, but this is not the default.

	Apache DS	OpenLDAP	Open DS	Active Directory
Anonymous	Y	Y	Y
Simple	Y	Y	Y	Y
LDAPS	Y	Y		Y
DIGEST-MD5	Y		Y	Y
CRAM-MD5	Y		Y	Y
GSSAPI	Y

Y = successfully tested

Setup

Configure LDAP by editing <SONARQUBE_HOME>/conf/sonar.properties (see table below).
Restart the SonarQube server and check the log file for:

INFO org.sonar.INFO Security realm: LDAP ...
INFO o.s.p.l.LdapContextFactory Test LDAP connection: OK

Log into SonarQube
On logout users will be presented a login page (/sessions/login), where they can choose to login as technical user or a domain user by passing appropriate credentials

From SonarScanners, we recommend using local technical users for authentication against SonarQube Server.

General configuration

Property	Description	Default value	Required	Example
`sonar.security.realm`	Set this to `LDAP` authenticate first against the external sytem. If the external system is not reachable or if the user is not defined in the external system, authentication will be performed against SonarQube's internal database.	none	Yes	`LDAP` (only possible value)
`sonar.authenticator.downcase`	Set to true when connecting to a LDAP server using a case-insensitive setup.	`false`	No
`ldap.url`	URL of the LDAP server. If you are using ldaps, you should install the server certificate into the Java truststore.	none	Yes	`ldap://localhost:10389`
`ldap.bindDn`	The username of an LDAP user to connect (or bind) with. Leave this blank for anonymous access to the LDAP directory.	none	No	`cn=sonar,ou=users,o=mycompany`
`ldap.bindPassword`	The password of the user to connect with. Leave this blank for anonymous access to the LDAP directory.	none	No	`secret`
`ldap.authentication`	Possible values: `simple`, `CRAM-MD5`, `DIGEST-MD5`, `GSSAPI`. See the tutorial on authentication mechanisms	`simple`	No
`ldap.realm`	See Digest-MD5 Authentication, CRAM-MD5 Authentication	none	No	example.org
`ldap.contextFactoryClass`	Context factory class.	`com.sun.jndi.ldap.LdapCtxFactory`	No
`ldap.StartTLS`	Enable use of `StartTLS`	`false`	No
`ldap.followReferrals`	Follow referrals or not. See Referrals in the JNDI	`true`

User mapping

Property	Description	Default value	Required	Example for Active Directory
`ldap.user.baseDn`	Distinguished Name (DN) of the root node in LDAP from which to search for users.	None	Yes	`cn=users,dc=example,dc=org`
`ldap.user.request`	LDAP user request.	`(&(objectClass=inetOrgPerson)(uid={login}))`	No	`(&(objectClass=user)(sAMAccountName={login}))`
`ldap.user.realNameAttribute`	Attribute in LDAP defining the user’s real name.	`cn`	No
`ldap.user.emailAttribute`	Attribute in LDAP defining the user’s email.	`mail`	No

Group Mapping Only groups (not roles) and static groups (not dynamic groups) are supported. Click here for more information.

For the delegation of authorization, groups must be first defined in SonarQube. Then, the following properties must be defined to allow SonarQube to automatically synchronize the relationships between users and groups.

Property	Description	Default value	Required	Example for Active Directory
`ldap.group.baseDn`	Distinguished Name (DN) of the root node in LDAP from which to search for groups.	none	No	`cn=groups,dc=example,dc=org`
`ldap.group.request`	LDAP group request.	`(&(objectClass=groupOfUniqueNames)(uniqueMember={dn}))`	No	`(&(objectClass=group)(member={dn}))`
`ldap.group.idAttribute`	Property used to specifiy the attribute to be used for returning the list of user groups in the compatibility mode.	`cn`	No	`sAMAccountName`

Sample configuration

# LDAP configuration
# General Configuration
sonar.security.realm=LDAP
ldap.url=ldap://myserver.mycompany.com
ldap.bindDn=my_bind_dn
ldap.bindPassword=my_bind_password
  
# User Configuration
ldap.user.baseDn=ou=Users,dc=mycompany,dc=com
ldap.user.request=(&(objectClass=inetOrgPerson)(uid={login}))
ldap.user.realNameAttribute=cn
ldap.user.emailAttribute=mail
 
# Group Configuration
ldap.group.baseDn=ou=Groups,dc=sonarsource,dc=com
ldap.group.request=(&(objectClass=posixGroup)(memberUid={uid}))

Advanced LDAP Topics

Authentication methods

Anonymous - Used when only read-only access to non-protected entries and attributes is needed when binding to the LDAP server.
Simple Simple authentication is not recommended for production deployments not using the ldaps secure protocol since it sends a cleartext password over the network.
CRAM-MD5 - The Challenge-Response Authentication Method (CRAM) based on the HMAC-MD5 MAC algorithm (RFC 2195).
DIGEST-MD5 - This is an improvement on the CRAM-MD5 authentication method (RFC 2831).
GSSAPI - GSS-API is Generic Security Service API (RFC 2744). One of the most popular security services available for GSS-API is the Kerberos v5, used in Microsoft's Windows 2000 platform.

For a full discussion of LDAP authentication approaches, see RFC 2829 and RFC 2251.

Multiple servers

To configure multiple servers:

# List the different servers
ldap.servers=server1,server2
  
# Configure server1
ldap.server1.url=ldap://server1:1389
ldap.server1.user.baseDn=dc=dept1,dc=com
...
 
# Configure server2
ldap.server2.url=ldap://server2:1389
ldap.server2.user.baseDn=dc=dept2,dc=com
...

Authentication will be tried on each server, in the order that they are listed in the configuration until one succeeds. User/group mapping will be performed against the first server on which the user is found.

Note that all the LDAP servers must be available while (re)starting the SonarQube server.

Migrate users to a new authentication method

If you are changing your delegated authentication method and migrating existing users from your previous authentication method, you can use the api/users/update_identity_provider web API to update your users' identity provider.

Troubleshooting

Detailed connection logs (and potential error codes received from LDAP server) are output to SonarQube's <SONARQUBE_HOME>/logs/web.log when logging is in DEBUG mode.
Time out when running SonarQube analysis using LDAP Java parameters are documented here: http://docs.oracle.com/javase/jndi/tutorial/ldap/connect/config.html. Such parameters can be set in sonar.web.javaAdditionalOpts in <SONARQUBE_HOME>/conf/sonar.properties.

Was this page helpful?

Delegating authentication

On this page

Group mapping

HTTP header authentication

GitHub and GitLab authentication

SAML authentication

Limitations

Example: Using Keycloak as a SAML identity provider

SAML and reverse proxy configuration

LDAP Authentication

Setup

Sample configuration

Advanced LDAP Topics

Authentication methods

Multiple servers

Migrate users to a new authentication method

Troubleshooting

Delegating authentication

On this page

.css-4ebt6d{position:relative;--tw-text-opacity:1;color:rgb(0 0 0 / var(--tw-text-opacity));}Group mapping.css-abpesc{width:2rem;display:none;margin-left:0.5rem;fill:#5F656D;}.css-abpesc:hover{fill:#290042;}

Group mapping