This version of the SonarQube documentation is no longer maintained. It relates to a version of SonarQube that is not active.

See latest version
Start Free
10.4 | Setup and upgrade | Install the server as a cluster

Install the server as a cluster

On this page

Overview Requirements Installing SonarQube from the ZIP file Install SonarQube from the Docker image Example Docker Compose configuration Next steps

Running SonarQube as a Cluster is only possible with a Data Center Edition.

The Data Center Edition allows SonarQube to run in a clustered configuration to make it resilient to failures.

Overview

The default configuration for the Data Center Edition comprises five servers, a load balancer, and a database server:

  • Two application nodes responsible for handling web requests from users (WebServer process) and handling analysis reports (ComputeEngine process). You can add application nodes to increase computing capabilities.
  • Three search nodes that host the Elasticsearch process that will store data indices. SSDs perform significantly better than HDDs for these nodes.
  • A reverse proxy / load balancer to load balance traffic between the two application nodes. The installing organization must supply this hardware or software component.
  • PostgreSQL, Oracle, or Microsoft SQL Server database server. This software must be supplied by the installing organization.

With this configuration, one application node and one search node can be lost without impacting users. Here is a diagram of the default topology:

Diagram of SonarQube installed as a cluster

Requirements

Network

You need a minimum of five servers (two application nodes and three search nodes) to form a SonarQube application cluster. Servers can be virtual machines; it is not necessary to use physical machines. You can also add application nodes to increase computing capabilities.

The operating system requirements for servers are available on the Requirements page.

All application nodes should be identical in terms of hardware and software. Similarly, all search nodes should be identical to each other. Application and search nodes, however, can differ from one another. Generally, search nodes are configured with more CPU and RAM than application nodes.

Search nodes can be located in different availability zones, but they must be in the same region. In this case, each search node should be located in a separate availability zone to maintain availability in the event of a failure in one zone.

Example machines

Here are the machines we used to perform our validation with a 200M issues database. You can use this as a minimum recommendation to build your cluster.

Database server

Supported database systems are available on the Requirements page.

Load balancer

SonarSource does not provide specific recommendations for reverse proxy / load balancer or solution-specific configuration. The general requirements for SonarQube Data Center Edition are:

  • Ability to balance HTTP requests (load) between the application nodes configured in the SonarQube cluster.
  • If terminating HTTPS, meets the requirements set out in Securing SonarQube behind a proxy.
  • No requirement to preserve or sticky sessions; this is handled by the built-in JWT mechanism.
  • Ability to check for node health for routing

Example with HAproxy

frontend http-in
    bind *:80
    bind *:443 ssl crt /etc/ssl/private/<server_certificate>
    http-request redirect scheme https unless { ssl_fc }
    default_backend sonarqube_server
backend sonarqube_server
    balance roundrobin
    http-request set-header X-Forwarded-Proto https
    option httpchk GET /api/system/status
    http-check expect rstring UP|DB_MIGRATION_NEEDED|DB_MIGRATION_RUNNING
    default-server check maxconn 200
    server node1 <server_endpoint_1>
    server node2 <server_endpoint_2>

License

You need a dedicated license to activate the Data Center Edition. If you don't have one yet, please contact the SonarSource Sales Team.

Support

Don't start this journey alone! As a Data Center Edition subscriber, SonarSource will assist with the setup and configuration of your cluster. Get in touch with SonarSource Support for help.

Installing SonarQube from the ZIP file

Additional parameters are required to activate clustering capabilities and specialize each node. These parameters are in addition to standard configuration properties used in a single-node configuration.

The sonar.properties file on each node will be edited to configure the node's specialization. A list of all cluster-specific configuration parameters is available in the Operate the cluster documentation.

Prior to configuration, you will need to generate a value for the sonar.auth.jwtBase64Hs256Secret property for the application nodes. The value is a HS256 key encoded with base64 and will be the same for both nodes. The following examples illustrate how to generate this value, where your_secret and your_key are arbitrary strings that can be modified:

On a Unix system:

echo -n "your_secret" | openssl dgst -sha256 -hmac "your_key" -binary | base64

On a Windows system with PowerShell:

$message = 'your_secret'
$secret = 'your_key'

$hmacsha = New-Object System.Security.Cryptography.HMACSHA256
$hmacsha.key = [Text.Encoding]::ASCII.GetBytes($secret)
$signature = $hmacsha.ComputeHash([Text.Encoding]::ASCII.GetBytes($message))
$signature = [Convert]::ToBase64String($signature)

echo $signature

Sample Configuration

The following example represents a sample configuration of a SonarQube cluster. The example assumes:

  • The VMs having IP addresses ip1 and ip2 (server1, server2) are application nodes
  • The VMs having IP addresses ip3, ip4, and ip5 (server3, server4 and server5) are search nodes

The configuration to be added to sonar.properties for each node is the following:

Application nodes

server1:

...
sonar.cluster.enabled=true
sonar.cluster.node.type=application
sonar.cluster.node.host=ip1
sonar.cluster.node.port=9003
sonar.cluster.hosts=ip1,ip2
sonar.cluster.search.hosts=ip3:9001,ip4:9001,ip5:9001
sonar.auth.jwtBase64Hs256Secret=YOURGENERATEDSECRET
...

server2

...
sonar.cluster.enabled=true
sonar.cluster.node.type=application
sonar.cluster.node.host=ip2
sonar.cluster.node.port=9003
sonar.cluster.hosts=ip1,ip2
sonar.cluster.search.hosts=ip3:9001,ip4:9001,ip5:9001
sonar.auth.jwtBase64Hs256Secret=YOURGENERATEDSECRET
...

Search nodes

server3

...
sonar.cluster.enabled=true
sonar.cluster.node.type=search
sonar.cluster.node.search.host=ip3
sonar.cluster.node.search.port=9001
sonar.cluster.node.es.host=ip3
sonar.cluster.node.es.port=9002
sonar.cluster.es.hosts=ip3:9002,ip4:9002,ip5:9002
...

server4

...
sonar.cluster.enabled=true
sonar.cluster.node.type=search
sonar.cluster.node.search.host=ip4
sonar.cluster.node.search.port=9001
sonar.cluster.node.es.host=ip4
sonar.cluster.node.es.port=9002
sonar.cluster.es.hosts=ip3:9002,ip4:9002,ip5:9002
...

server5

...
sonar.cluster.enabled=true
sonar.cluster.node.type=search
sonar.cluster.node.search.host=ip5
sonar.cluster.node.search.port=9001
sonar.cluster.node.es.host=ip5
sonar.cluster.node.es.port=9002
sonar.cluster.es.hosts=ip3:9002,ip4:9002,ip5:9002
...

Sample Installation Process

The following is an example of the default SonarQube cluster installation process. You need to tailor your installation to the specifics of the target installation environment and the operational requirements of the hosting organization.

Prepare the cluster environment:

  1. Prepare the cluster environment by setting up the network and provisioning the nodes and load balancer.
  2. Follow the Install the server documentation to configure the database server.

Prepare a personalized SonarQube package:

  1. On a single application node of the cluster, download and install SonarQube Data Center Edition, following the usual Install the server documentation.
  2. Add cluster-related parameters to <sonarqubeHome>/conf/sonar.properties.
  3. This is also a good opportunity to install plugins. Download and place a copy of each plugin JAR in <sonarqubeHome>/extensions/plugins. Be sure to check compatibility with your SonarQube version using the Plugin version matrix.
  4. Zip the directory <sonarqubeHome>. This archive is a customized SonarQube Data Center Edition package that can be copied to other nodes.

Test configuration on a single node:

  1. On the application node where you created your Zip package, comment out all cluster-related parameters in <sonarqubeHome>/conf/sonar.properties.
  2. Configure the load balancer to proxy with single application node.
  3. Start server and test access through load balancer.
  4. Request license from SonarSource Sales Team.
  5. After applying license, you will have a full-featured SonarQube system operating on a single node.

Deploy SonarQube package on other nodes:

  1. Unzip SonarQube package on the other four nodes.
  2. Configure node-specific parameters on all five nodes in <sonarqubeHome>/conf/sonar.properties and ensure application node-specific and search node-specific parameters are properly set.
  3. Start all search nodes.
  4. After all search nodes are running, start all application nodes.
  5. Configure the load balancer to proxy with both application nodes.

Install SonarQube from the Docker image

You can also install a cluster using our docker images. The general setup is the same but is shifted to a Docker-specific terminology.

Requirements

Network

All containers should be in the same network. This includes search and application nodes. For the best performance, it is advised to check for low latency between the database and the cluster nodes.

Limits

The limits of each container depend on the workload that each container has. A good starting point would be:

  • cpus: 0.5
  • mem_limit: 4096M
  • mem_reservation: 1024M

The 4Gb mem_limit should not be lower as this is the minimal value for Elasticsearch.

Scalability

Application nodes can be scaled using replicas. This is not the case for the Search nodes as Elasticsearch will not become ready. See the Configure and operate a cluster for more information.

Volumes

You'll use the following volumes in your configuration:

  • sonarqube_data – In the Docker Compose configuration example in the following section, volumes are shared between replicas in the application nodes, so you don't need a sonarqube_data volume on your application nodes. In the search nodes, the sonarqube_data volume contains the Elasticsearch data and helps reduce startup time, so we recommend having a sonarqube_data volume on each search node.
  • sonarqube_extensions – For application nodes, we recommend sharing a common sonarqube_extensions volume which contains any plugins you install and the Oracle JDBC driver if necessary.
  • sonarqube_logs – For both application and search nodes, we recommend sharing a common sonarqube_logs volume which contains SonarQube logs. The volume will be populated with a new folder depending on the container's hostname and all logs of this container will be put into this folder. This behavior also happens when a custom log path is specified via the Docker environment variables.

Example Docker Compose configuration

Click the heading below to expand the docker-compose.yml file example.

The example below is for evaluation purposes and will work with the latest version of the SonarQube Docker image. If want to use the LTS version of SonarQube, you need to update the example with the sonarqube:lts-datacenter-app and sonarqube:lts-datacenter-search image tags.

YAML for evaluation purposes
version: "3"

services:
  sonarqube:
    image: sonarqube:datacenter-app
    depends_on:
      search-1:
        condition: service_healthy
      search-2:
        condition: service_healthy
      search-3:
        condition: service_healthy
    networks:
      - sonar-network
    cpus: 0.5
    mem_limit: 4096M
    mem_reservation: 1024M
    environment:
      SONAR_JDBC_URL: jdbc:postgresql://db:5432/sonar
      SONAR_JDBC_USERNAME: sonar
      SONAR_JDBC_PASSWORD: sonar
      SONAR_WEB_PORT: 9000
      SONAR_CLUSTER_SEARCH_HOSTS: "search-1,search-2,search-3"
      SONAR_CLUSTER_HOSTS: "sonarqube"
      SONAR_AUTH_JWTBASE64HS256SECRET: "dZ0EB0KxnF++nr5+4vfTCaun/eWbv6gOoXodiAMqcFo="
      VIRTUAL_HOST: sonarqube.dev.local
      VIRTUAL_PORT: 9000
    volumes:
      - sonarqube_extensions:/opt/sonarqube/extensions
      - sonarqube_logs:/opt/sonarqube/logs
  search-1:
    image: sonarqube:datacenter-search
    hostname: "search-1"
    cpus: 0.5
    mem_limit: 4096M
    mem_reservation: 1024M
    depends_on:
      - db
    networks:
      - sonar-network
    environment:
      SONAR_JDBC_URL: jdbc:postgresql://db:5432/sonar
      SONAR_JDBC_USERNAME: sonar
      SONAR_JDBC_PASSWORD: sonar
      SONAR_CLUSTER_ES_HOSTS: "search-1,search-2,search-3"
      SONAR_CLUSTER_NODE_NAME: "search-1"
    volumes:
      - search-data-1:/opt/sonarqube/data
    healthcheck:
        test: wget --no-proxy -qO- "http://$$SONAR_CLUSTER_NODE_NAME:9001/_cluster/health?wait_for_status=yellow&timeout=50s" | grep -q -e '"status":"green"' -e '"status":"yellow"';  if [ $? -eq 0 ]; then exit 0; else exit 1; fi
        interval: 25s
        timeout: 1s
        retries: 3
        start_period: 55s
  search-2:
    image: sonarqube:datacenter-search
    hostname: "search-2"
    cpus: 0.5
    mem_limit: 4096M
    mem_reservation: 1024M
    depends_on:
      - db
    networks:
      - sonar-network
    environment:
      SONAR_JDBC_URL: jdbc:postgresql://db:5432/sonar
      SONAR_JDBC_USERNAME: sonar
      SONAR_JDBC_PASSWORD: sonar
      SONAR_CLUSTER_ES_HOSTS: "search-1,search-2,search-3"
      SONAR_CLUSTER_NODE_NAME: "search-2"
    volumes:
      - search-data-2:/opt/sonarqube/data
    healthcheck:
        test: wget --no-proxy -qO- "http://$$SONAR_CLUSTER_NODE_NAME:9001/_cluster/health?wait_for_status=yellow&timeout=50s" | grep -q -e '"status":"green"' -e '"status":"yellow"';  if [ $? -eq 0 ]; then exit 0; else exit 1; fi
        interval: 25s
        timeout: 1s
        retries: 3
        start_period: 55s
  search-3:
    image: sonarqube:datacenter-search
    hostname: "search-3"
    cpus: 0.5
    mem_limit: 4096M
    mem_reservation: 1024M
    depends_on:
      - db
    networks:
      - sonar-network
    environment:
      SONAR_JDBC_URL: jdbc:postgresql://db:5432/sonar
      SONAR_JDBC_USERNAME: sonar
      SONAR_JDBC_PASSWORD: sonar
      SONAR_CLUSTER_ES_HOSTS: "search-1,search-2,search-3"
      SONAR_CLUSTER_NODE_NAME: "search-3"
    volumes:
      - search-data-3:/opt/sonarqube/data
    healthcheck:
        test: wget --no-proxy -qO- "http://$$SONAR_CLUSTER_NODE_NAME:9001/_cluster/health?wait_for_status=yellow&timeout=50s" | grep -q -e '"status":"green"' -e '"status":"yellow"';  if [ $? -eq 0 ]; then exit 0; else exit 1; fi
        interval: 25s
        timeout: 1s
        retries: 3
        start_period: 55s
  db:
    image: postgres:13
    networks:
      - sonar-network
    environment:
      POSTGRES_USER: sonar
      POSTGRES_PASSWORD: sonar
    volumes:
      - postgresql:/var/lib/postgresql
      - postgresql_data:/var/lib/postgresql/data
  proxy:
    image: jwilder/nginx-proxy
    ports:
      - "80:80"
    volumes:
      - /var/run/docker.sock:/tmp/docker.sock:ro
    networks:
      - sonar-network
      - sonar-public

networks:
  sonar-network:
    ipam:
      driver: default
      config:
        - subnet: 172.28.2.0/24
  sonar-public:
    driver: bridge

volumes:
  sonarqube_extensions:
  sonarqube_logs:
  search-data-1:
  search-data-2:
  search-data-3:
  postgresql:
  postgresql_data:

Next steps

Once you've completed these steps, check out the Operate your cluster documentation.

Was this page helpful?

© 2008-2024 SonarSource SA. All rights reserved. SONAR, SONARSOURCE, SONARLINT, SONARQUBE, SONARCLOUD, and CLEAN AS YOU CODE are trademarks of SonarSource SA.

Creative Commons License