LDAP
You can configure SonarQube authentication and authorization to an LDAP server (including the LDAP service of Active Directory)
You can configure SonarQube authentication and authorization to an LDAP server (including the LDAP service of Active Directory) by configuring the correct values in <SONARQUBE_HOME>/conf/sonar.properties
.
The main features are:
Password checking against the external authentication engine.
Automatic synchronization of usernames and emails.
Automatic synchronization of relationships between users and groups (authorization).
Ability to authenticate against both the external and the internal authentication systems. There is an automatic fallback to the SonarQube internal system if the LDAP server is down.
During the first authentication trial, if the user’s password is correct, the SonarQube database is automatically populated with the new user. Each time a user logs into SonarQube, the username, the email, and the groups this user belongs to that are refreshed in the SonarQube database. You can choose to have group membership synchronized as well, but this is not the default.
Apache DS
OpenLDAP
Open DS
Active Directory
Anonymous
Simple
LDAPS
DIGEST-MD5
CRAM-MD5
GSSAPI
= successfully tested
Setup
Configure LDAP by editing
<SONARQUBE_HOME>/conf/sonar.properties
(see table below).Restart the SonarQube server and check the log file for:
INFO org.sonar.INFO Security realm: LDAP ...
INFO o.s.p.l.LdapContextFactory Test LDAP connection: OK
Log in to SonarQube.
On log out users will be presented with a login page (
/sessions/login
), where they can choose to log in as a technical user or a domain user by passing the appropriate credentials.
For SonarScanners, we recommend using Security for authentication against SonarQube Server.
General Configuration
Property
Description
Default value
Required
Example
sonar.security.realm
Set this to LDAP
authenticate first against the external sytem. If the external system is not reachable or if the user is not defined in the external system, authentication will be performed against SonarQube’s internal database.
none
Yes
LDAP
(only possible value)
sonar.authenticator.downcase
Set to true when connecting to a LDAP server using a case-insensitive setup.
false
No
ldap.url
URL of the LDAP server. If you are using ldaps, you should install the server certificate into the Java truststore.
none
Yes
ldap://localhost:10389
ldap.bindDn
The username of an LDAP user to connect (or bind) with. Leave this blank for anonymous access to the LDAP directory.
none
No
cn=sonar,ou=users,o=mycompany
ldap.bindPassword
The password of the user to connect with. Leave this blank for anonymous access to the LDAP directory.
none
No
secret
ldap.authentication
Possible values: simple
, CRAM-MD5
, DIGEST-MD5
, GSSAPI
. See the tutorial on authentication mechanisms
simple
No
ldap.contextFactoryClass
Context factory class.
com.sun.jndi.ldap.LdapCtxFactory
No
ldap.StartTLS
Enable use of StartTLS
false
No
User Mapping
Property
Description
Default value
Required
Example for Active Directory
ldap.user.baseDn
Distinguished Name (DN) of the root node in LDAP from which to search for users.
None
Yes
cn=users,dc=example,dc=org
ldap.user.request
LDAP user request.
(&(objectClass=inetOrgPerson)(uid={login}))
No
(&(objectClass=user)(sAMAccountName={login}))
ldap.user.realNameAttribute
Attribute in LDAP defining the user’s real name.
cn
No
ldap.user.emailAttribute
Attribute in LDAP defining the user’s email.
mail
No
Group Mapping Only groups (not roles) and static groups (not dynamic groups) are supported. Click here for more information.
For the delegation of authorization, Security. Then, the following properties must be defined to allow SonarQube to automatically synchronize the relationships between users and groups.
Property
Description
Default value
Required
Example for Active Directory
ldap.group.baseDn
Distinguished Name (DN) of the root node in LDAP from which to search for groups.
none
No
cn=groups,dc=example,dc=org
ldap.group.request
LDAP group request.
(&(objectClass=groupOfUniqueNames)(uniqueMember={dn}))
No
(&(objectClass=group)(member={dn}))
ldap.group.idAttribute
Property used to specifiy the attribute to be used for returning the list of user groups in the compatibility mode.
cn
No
sAMAccountName
Configuration sample
# LDAP configuration
# General Configuration
sonar.security.realm=LDAP
ldap.url=ldap://myserver.mycompany.com
ldap.bindDn=my_bind_dn
ldap.bindPassword=my_bind_password
# User Configuration
ldap.user.baseDn=ou=Users,dc=mycompany,dc=com
ldap.user.request=(&(objectClass=inetOrgPerson)(uid={login}))
ldap.user.realNameAttribute=cn
ldap.user.emailAttribute=mail
# Group Configuration
ldap.group.baseDn=ou=Groups,dc=sonarsource,dc=com
ldap.group.request=(&(objectClass=posixGroup)(memberUid={uid}))
Advanced LDAP Topics
Authentication Methods
Anonymous
- Used when only read-only access to non-protected entries and attributes is needed when binding to the LDAP server.Simple
Simple authentication is not recommended for production deployments not using the LDAP secure protocol since it sends a cleartext password over the network.CRAM-MD5
- The Challenge-Response Authentication Method (CRAM), based on the HMAC-MD5 MAC algorithm (RFC 2195).DIGEST-MD5
- This is an improvement on the CRAM-MD5 authentication method (RFC 2831).GSSAPI
- GSS-API is Generic Security Service API (RFC 2744). One of the most popular security services available for GSS-API is the Kerberos v5, used in Microsoft’s Windows 2000 platform.
For a full discussion of LDAP authentication approaches, see RFC 2829 and RFC 2251.
Multiple Servers
To configure multiple servers:
# List the different servers
ldap.servers=server1,server2
# Configure server1
ldap.server1.url=ldap://server1:1389
ldap.server1.user.baseDn=dc=dept1,dc=com
...
# Configure server2
ldap.server2.url=ldap://server2:1389
ldap.server2.user.baseDn=dc=dept2,dc=com
...
Authentication will be tried on each server, in the order they are listed in the configurations until one succeeds.
Note that all the LDAP servers must be available while (re)starting the SonarQube server.
Migrate users to a new authentication method
If you are changing your delegated authentication method and migrating existing users from your previous authentication method, you can use the api/users/update_identity_provider
web API to update your users’ identity provider.
Troubleshooting
Detailed connection logs (and potential error codes received from the LDAP server) are output to SonarQube’s
<SONARQUBE_HOME>/logs/web.log
, when logging is inDEBUG
mode.Time outs when running SonarQube analysis using LDAP Java parameters are documented here: http://docs.oracle.com/javase/jndi/tutorial/ldap/connect/config.html. Such parameters can be set in
sonar.web.javaAdditionalOpts
in<SONARQUBE_HOME>/conf/sonar.properties
.
Last updated
Was this helpful?