Analysis scope

There are many cases where you do not want to analyze every aspect of every source file in your project. For example, your project may contain generated code, source code from libraries, or intentionally duplicated code.

In such cases, it makes sense to skip some or all aspects of analysis for these files, thus removing noise and narrowing the focus to issues that really matter.

To help narrow the focus, SonarQube Server gives you several options to precisely configure what will be analyzed and how. Most of the properties that define your analysis scope can be defined in the SonarQube Server UI. Other parameters must be set explicitly in the scanner invocation or in the appropriate configuration file as we describe in more detail below; see the Analysis parameters page for more detail.

Setting the initial scope

The initial scope of analysis is controlled by the following parameters:

• sonar.sources define the initial scope of analysis for non-test code in your project.
• sonar.tests define the initial scope of analysis for test code in your project.

These parameters define the starting point for analysis scope adjustment:

• Files outside the scope defined by these parameters will not be analyzed at all.
• Files within the scope defined by these parameters will be analyzed unless excluded by further adjustments (exclusions, inclusions, etc. See below.)

Additionally, these parameters are:

• only set at the project level. There are no global, server-level equivalents for these parameters.
• either set automatically by your SonarScanner, set explicitly in the sonar-project.properties configuration file, or set on the command line that invokes the scanner. There are no UI settings for these parameters.
• set explicitly and both accept a comma-delimited list of paths. Pattern matching with wildcards is not supported.

Why is test code scoped separately?

Test and non-test code are distinguished because

• Different analysis rules are applied to the two categories.
• The two categories have different metrics
• Test code does not count toward lines-of-code limits defined by your license.
• Test code does not count towards coverage (you don't have to test your test code)

Automatic setting for Maven, Gradle, and .NET

Default settings for other scenarios

If you are not using Maven, Gradle or .NET then

• By default, sonar.sources is set to the current working directory (the path .).
• By default, sonar.tests is not set.

Explicit settings

If the defaults are not suitable (for example, if you do have test code) you must set the parameters explicitly in the scanner invocation or in the appropriate configuration file (see Analysis parameters).

When explicitly set, both sonar.sources and sonar.tests take a comma-delimited list of directories or files.

• The entries in the list are simple paths. Wildcards (*, **, and ?) are not allowed.
• A directory in the list means that all analyzable files and directories recursively below it are included. An individual file in the list means that the file is included.
• The paths are interpreted relative to the project base directory. The base directory is defined by the scanner you are using. In most cases, this is the root directory of the project. If you are using the SonarScanner CLI, your base directory will be the current directory from which you invoke the tool (though this can be overridden using the parameter sonar.projectBaseDir).

Example 1

Let's say your repository looks something like this, with your source and test code clearly separated at the top level:

In this case, you would set your sonar.sources like this:

and your sonar.tests like this:

If you configure your scope in the sonar-project.properties file, it would look like this:

# Define separate root directories for sources and tests
sonar.sources = src/
sonar.tests = test/

There is no need for any further fine-tuning.

Wildcard patterns

Most of the parameters discussed below, such as exclusion and inclusion-related parameters, use path-matching patterns (sometimes known as simple wildcard patterns).

The recognized path-matching patterns are case-sensitive and defined using the following wildcards:

• *  Match zero or more characters (not including the directory delimiter,  / ).
• **  Match zero or more directory segments or files within the path.
• ?  Match a single character (not including the directory delimiter,  / ).

Wildcard examples

• The pattern  **/*.css
  • matches  anyDirectory/anyFile.css
  • doesn't match  org/sonar.api/MyBean.java
• The pattern  **/*Bean.java
  • matches  org/sonar.api/MyBean.java
  • doesn't match org/sonar.api/mybean.java or org/sonar/util/MyDTO.java
• The pattern  **/*Bean?.java
  • matches  org/sonar/util/MyOtherBean1.java
  • doesn't match  org/sonar/util/MyOtherBean.java
• The pattern  org/sonar/*
  • matches  org/sonar/MyClass.java
  • doesn't match  org/sonar/util/MyClassUtil.java
• The pattern  org/sonar/**/* is equivalent to org/sonar/** and
  • matches  org/sonar/anyDirectory/anyFile
  • matches org/sonar/MyClass.java
  • doesn't match  org/radar/MyClass.java

Note that the sonar.sources and sonar.tests parameters take simple paths and cannot use wildcard patterns.

Location of UI settings

Unless otherwise noted, all the parameters below are settable at both the global and project level. The UI locations for the settings are found under:

• Administration > Configuration > General Settings (for global settings)
• Project Settings > General Settings (for project-level settings)

Any setting made at the global level will apply to all projects unless overridden at the project level (the only exceptions are the global exclusion parameters discussed above).

File exclusion and inclusion

If the directory structure of your project does not cleanly separate source code from test code at the top level, you may have to adjust the scope using exclusions and inclusions.

These are set in the UI for both global and project levels, as follows:

Global level

Administration > Configuration > General Settings > Analysis Scope > A. File Exclusions

• Global Source File Exclusions: One or more wildcard patterns defining which files are filtered out from those defined by sonar.sources. This setting will apply to all projects on your SonarQube Server. It cannot be overridden by any project-level source file exclusion. It also cannot be set as a key in a configuration file. If it is set, it must be set in the UI.
• Source File Exclusions: The same as the global version above except that it can be overridden by a project-level source file exclusion. It cannot be set as a key in a configuration file. If it is set, it must be set in the UI.
• Global Test File Exclusions: Same as the Global Source File Exclusions, above, except that it applies to test files.
• Source File Inclusions: One or more wildcard patterns defining which files to retain, while filtering out all others, from those defined by sonar.sources. This applies to all projects on your SonarQube Server, though it can be overridden at the project level. It cannot be set as a key in a configuration file. If it is set, it must be set in the UI.
• Test File Exclusions: Same as the Source File Exclusions, above, except that it applies to test files.
• Test File Inclusions: Same as the Source File Inclusions, above, except that it applies to test files.

Project level

Project Settings > General Settings > Analysis Scope > A. File Exclusions

• Source File Exclusions: One or more wildcard patterns defining which files are filtered out from those defined by sonar.sources. This can also be set in a configuration file using the key sonar.exclusions.
• Source File Inclusions: One or more wildcard patterns defining which files to retain, while filtering out all others, from those defined by sonar.sources. This can also be set in a configuration file using the key sonar.inclusions.
• Test File Exclusions: One or more wildcard patterns defining which files are filtered out from those defined by sonar.tests. This can also be set in a configuration file with the key sonar.test.exclusions.
• Test File Inclusions: One or more wildcard patterns defining which files to retain, while filtering out all others, from those defined by sonar.tests. This can also be set in a configuration file using the key sonar.test.inclusions.

To set these parameters by key you can:

• Set them in the configuration file <YOUR_PROJECT>/sonar-project.properties.
• Set them on the command line when invoking the scanner.
• In the case of Maven, Gradle, or .NET projects, set them in the appropriate framework-specific configuration file.

How the parameter values are interpreted

The wildcard patterns are interpreted relative to the project base directory.

Exclusions and inclusions apply on top of the sonar.sources and sonar.tests settings. Both the exclusion and inclusion parameters act as filters. They only ever reduce the number of files in the analyzable set, they never add to the set.

Example 2

Let's say your repository looks something like this, with your test code intermingled with your source code:

You would define your sonar.sources like this, taking in the whole src directory:

and then set Source File Exclusions (key sonar.exclusions) to

src/**/test/**/*

The result is that the set of source files to be scanned is everything under src minus every test subdirectory:

To define the test files, first set sonar.tests to the whole src directory:

and then set Test File Inclusions (key sonar.test.inclusions) to

src/**/test/**/*

The result is that the set of source files to be scanned is everything under src minus everything that is not a test subdirectory:

If you configure your scope in the sonar-project.properties file, it would look like this:

# Define the same root directory for sources and tests
sonar.sources = src/
sonar.tests = src/

# Include test subdirectories in test scope
sonar.test.inclusions = src/**/test/**/*

# Exclude test subdirectories from source scope
sonar.exclusions = src/**/test/**/*

Naming of parameters

Note that the initial scoping parameter for test code is sonar.tests (that's tests with an s!) while the exclusion and inclusion parameters for test code are sonar.test.exclusions and sonar.test.inclusions (that's test, without an s!).

Relationship with test coverage reporting

The test scoping parameters ( sonar.tests, sonar.test.exclusion, and sonar.test.inclusion) do not have anything to do with setting up test coverage reporting (see Test coverage). However, SonarQube Server will report an error if an imported coverage report lists a test file not encountered in the directories specified by the scoping parameters.

The parameter sonar.coverage.exclusions, on the other hand, is directly related to test coverage reporting (see below).

Code coverage exclusion

Analysis Scope > B. Code Coverage Exclusions

This setting lets you exclude specific files or directories from code coverage reporting. The value of the parameter is a comma-delimited list of path-matching patterns relative to the current working directory.

When setting by key, use sonar.coverage.exclusions

Duplication exclusions

Analysis Scope > C. Duplication Exclusions

This setting lets you exclude specific files or directories from duplication checking. The value is a comma-delimited list of path-matching patterns relative to the current working directory.

When setting by key, use sonar.cpd.exclusions

Setting the scope by file type

Languages > Your Language

Most languages offer a way to restrict the scope of analysis to files matching a set of extensions. You can specify one or more suffixes (file extensions) for each language. For example, for the C language, .c and .h are set by default.

When setting by key, use the appropriate parameter of the form sonar.<LANGUAGE>.file.suffixes.

Setting the secret detection scope

By default, SonarQube Server detects exposed secrets in all files processed by the language analyzers. You can refine the scope of the secret detection: see Adjusting the secret detection scope.

Ignoring issues in files based on content

Analysis Scope > D. Issue Exclusions > Ignore Issues on Files

You can ignore files that contain a block of code matching a given regular expression. All issues as well as security hotspots, will be ignored within those files. In this setting, you can enter one or more regular expression patterns. Any file containing at least one of the specified patterns will be ignored.

For example, let's say you have generated class files in your Java project that you wish to exclude. The files look something like this:

@Generated("com.example.generated")
public class GeneratedClass extends AnotherClass {
    // Some generated code
}

To exclude all such files, you might set this parameter to:

@Generated\(".*"\)

Note that since this value is a regular expression, you need to escape the ( and ) parentheses characters and use the expression .* match the string in between those parentheses.

The key for this parameter is sonar.issue.ignore.allfile, however, because it is a multi-value property, we recommend that it only be set through the UI.

Ignoring blocks within files

Analysis Scope > D. Issue Exclusions > Ignore Issues on Blocks

You can ignore specific blocks of code within a file while continuing to scan the remainder of the file. Blocks to be ignored are delimited within the file by start and end strings. You specify these start and end strings by regular expressions. All issues as well as security hotspots within those blocks, will be ignored. You can enter one or more pairs of regular expression patterns. Any code in any file that lies between the start pattern and its corresponding end pattern will be ignored. Note that:

• If the first regular expression is found but not the second one, the end of the file is considered to be the end of the block.
• Regular expressions are not matched across multiple lines.

For example, let's say you want to ignore the code in the method doSomethingElse using block delimiters, like this:

public class MyClass {
    public MyClass() {
        ...
    }

    public void doSomething() {
        ...
    }

    // BEGIN-NOSCAN
    public void doSomethingElse()
    {
        ...
    }
    // END-NOSCAN
}

You could specify the following regular expressions:

Start of block: \s*//\s*START-NOSCAN

End of block: \s*//\s*END-NOSCAN

These regular expressions ensure that the start and end block delimiters will be recognized regardless of the number of spaces around the line comment characters (//).

The key for this parameter is sonar.issue.ignore.block. However, because it is a multi-value property, we recommend that it only be set through the UI.

Excluding specific rules from specific files

Analysis Scope > D. Issue Exclusions > Ignore Issues on Multiple Criteria

You can prevent specific rules from being applied to specific files by combining one or more pairs of strings consisting of a rule key pattern and a file path pattern.

The key for this parameter is sonar.issue.ignore.multicriteria, however, because it is a multi-value property, we recommend that only be set through the UI.

Rule key pattern

A rule key pattern consists of a rule repository name, followed by a colon, followed by a rule key, or a rule name globbing pattern.

For example:

• java:S1195 matches exactly the rule S1195 in the Java rule repository.
• java:*Naming* matches all rules in the Java repository that include the string Naming in their rule name.

You can find the fully qualified rule ID of the rule definition and the rule name in the rule definition.

For example, for this rule:

• Rule ID: css:S4655
• Rule name: "!important" should not be used on "keyframes"

File path pattern

A file path pattern uses the path-matching format described above to specify a set of directories or files.

File path pattern examples

• Ignore all issues in all files:
  • Rule key pattern: *
  • File path pattern: **/*
• Ignore all issues in the file bank/ZTR00021.cbl:
  • Rule key pattern: *
  • File path pattern: bank/ZTR00021.cbl
• Ignore all issues in files located directly in the Java package com.foo, but not in its sub-packages:
  • Rule key pattern: *
  • File path pattern: com/foo/*
• Ignore all issues against the coding rule cpp:Union in files in the directory object and its sub-directories:
  • Rule key pattern: cpp:Union
  • File path pattern: object/**/*

Applying specific rules to specific files

You can only apply specific rules to specific files.

• Global level: Administration > Configuration > General Settings > Analysis Scope > D. Issue Exclusions > Restrict Scope of Coding Rules
• Project level: Project Settings > General Settings > Analysis Scope > D. Issue Exclusions > Restrict Scope of Coding Rules

The mechanics of setting these parameters are the same as for sonar.issue.ignore.multicriteria, above: Each entry consists of a rule key pattern and a file path pattern. The difference is that in this case, it means that the specified rule will only be applied to the specified set of files.

The key for this parameter is sonar.issue.enforce.multicriteria. However, because it is a multi-value property, we recommend that it should only be set through the UI.

Multi-value pattern examples

• Only check the rule "Magic Number" on "Bean" objects and not on anything else:
  • Rule key pattern: checkstyle:com.puppycrawl.tools.checkstyle.checks.coding.MagicNumberCheck
  • File path pattern: **/*Bean.java
• Only check against the rule Prevent GO TO statement from transferring control outside current module on COBOL programs in the directories bank/creditcard and bank/bankcard (this restriction requires two criteria):
  • Rule key pattern 1: cobol:COBOL.GotoTransferControlOutsideCurrentModuleCheck
  • File path pattern 1: bank/creditcard/**/*
  • Rule key pattern 2: cobol:COBOL.GotoTransferControlOutsideCurrentModuleCheck
  • File path pattern 2: bank/bankcard/**/*

SonarQube Server respects ignored files

Your SonarQube Server analysis will automatically exclude files that are ignored by your source code control system. For example, in git repositories, it respects the .gitignore file. SonarQube Server also respects the ignore directives used in SVN repositories.

This behavior can be disabled by setting sonar.scm.exclusions.disabled = true in the configuration file or command line.

Note that while SonarQube Server understands standard .gitignore directives, it does not understand .gitignore negation patterns. These are the patterns preceded by an exclamation mark(!). We recommend not using them in SonarQube Server projects.